The vertical multistage pumps EM with the Drive-Tech MINI are the new, revolutionary Franklin booster set which combines efficiency, simplicity, innovation and safety:
- Efficient: it allows to save energy cost than the common fixed speed system.
- Simple: it is mounted directly on the motor control box and supplied with pressure transducer.
- Innovative: the device can be controlled manually by the panel on board and by the smartphone App Franklin (FE Connect Drive-Tech) via Bluetooth
- Safe: Drive-Tech mini mounts and integrated Class B filter to avoid any disturbs in the domestic power grid
Downloads
Описание
Описание
Features
- Compact close-coupled design, robust and corrosion resistant / Superior efficiency and performance
- Floating neck ring in PPS
- Heavy duty oversize motor shaft
- Impellers and diffusers are made of stainless steel in order to achieve durability
- Easy maintenance
- Strong motor ball bearing fitted in the motor
- Pumping of clear non-loaded fluids
- Mechanical seal carbon/ceramic/EPDM Type E0
- Energy saving due to variable speed control
- Soft start and soft stop
- Extended system life and reliability
- Simplified installation on motor or wall
- Easy and fast commissioning thanks to initial configuration wizard
- Installation on humid and dusty environment made possible by IP55 (NEMA 4) protection degree
- High thermal and mechanical performance thanks to aluminum case and independent ventilation
Pump specification
- Flow: up to 17 m³/h
- Head: up to 101 m
- Discharge and Suction port: Threaded or Oval connections
- Maximum working pressure 10 Bar
- Direction of rotation: clockwise looking at the pump from the top down.
- Maximum altitude at rated current: 1000 m
- Maximum ambient temperature 40 °C
- Liquid temperature range:
- Minimum: 0 °C
- Maximum: +80 °C for domestic use (uses covered by CEI EN standard 60335-2-41);
- The hydraulic characteristics are guaranteed, according to ISO standard 9906:2012, grade 3B
Drive-Tech MINI specification
- Advanced functionalities:
- Monitoring and programming with smartphone and FE Connect App, available for Android and iOS mobile devices
- Remote control using a smartphone nearby as a modem
- Copy and paste of programming recipes
- Ability to send reports via email
- Multilingual support
- Control modes:
- Constant pressure control
- Constant or proportional differential pressure control
- Constant temperature control
- Constant differential temperature control
- Constant flow control
- External frequency control (trimmer) or 1 or 2 preset frequencies control
- Built-in protection against:
- Overvoltage and undervoltage
- Overcurrent and no load
- Dry running
- Overtemperature
- EMC compatibility for residential environment:
- Integrated PFC (P.F. 1) to meet EN61000-3-2
- Integrated input filter for Category C1 (EN61800-3), Class B (EN55011)
- Multi-pump operation (COMBO):
- Up to 8 units
- Working alternation for uniform pumps wearing
- Master or slave replacement in case of failure to ensure continuity of operation
- Advanced motor controls:
- Next generation control of asynchronous motors
- Sensorless control of permanent magnet synchronous motors
- Inputs and outputs:
- 2 programmable digital inputs for motor start & stop
- Modbus RTU
- 2 output relays for alarm and run indication
- 2 analog inputs 4-20 mA
- 2 analog inputs 0-10 V
Отзиви (0)
Отзиви
Все още няма отзиви.