Многостъпална хоризонтална помпа EH DTm с Drive-Tech MINI

The horizontal multistage pumps EH with the Drive-Tech MINI are the new, revolutionary Franklin booster set which combines efficiency, simplicity, innovation and safety:

  • Efficient: it allows to save energy cost than the common fixed speed system.
  • Simple: it is mounted directly on the motor control box and supplied with pressure transducer.
  • Innovative: the device can be controlled manually by the panel on board and by the smartphone App Franklin (FE Connect Drive-Tech) via Bluetooth
  • Safe: Drive-Tech mini mounts and integrated Class B filter to avoid any disturbs in the domestic power grid


Каталог EH DTM

Наръчник за използване на EH DTM




  • Compact close-coupled design, robust and corrosion resistant / Superior efficiency and performances
  • Flexible application base plate
  • Floating neck ring in PPS
  • Heavy duty oversize motor shaft
  • Impellers and diffusers are made of stainless steel in order to achieve durability
  • Easy maintenance
  • Strong motor rolling bearing fitted in the motor bracket
  • Pumping of clear non-loaded fluids
  • Mechanical seal Type E0 = carbon/ceramic/EPDM
  • Energy saving due to variable speed control
  • Soft start and soft stop
  • Extended system life and reliability
  • Simplified installation on motor or wall
  • Easy and fast commissioning thanks to initial configuration wizard
  • Installation on humid and dusty environment made possible by IP55 (NEMA 4) protection degree
  • High thermal and mechanical performance thanks to aluminum case and independent ventilation

Pump specification

  • Flow: up to 17 m³/h
  • Head: up to 99 m
  • Connections: Rp threaded for inlet and outlet
  • Maximum working pressure: 10 Bar
  • Maximum altitude at rated current: 1000 m
  • Maximum ambient temperature: 40 °C
  • Liquid temperature range:
  • Minimum: from 0 °C according to gasket material
  • Maximum: +80 °C for domestic use (uses covered by CEI EN standard 60335-2-41)
  • The hydraulic characteristics are guaranteed, according to ISO standard 9906:2012, grade 3B

Drive-Tech MINI specification

  • Advanced functionalities:
  • Monitoring and programming with smartphone and FE Connect App, available for Android and iOS mobile devices
  • Remote control using a smartphone nearby as a modem
  • Copy and paste of programming recipes
  • Ability to send reports via email
  • Multilingual support
  • Control modes:
  • Constant pressure control
  • Constant or proportional differential pressure control
  • Constant temperature control
  • Constant differential temperature control
  • Constant flow control
  • External frequency control (trimmer) or 1 or 2 preset frequencies control
  • Built-in protection against:
  • Overvoltage and undervoltage
  • Overcurrent and no load
  • Dry running
  • Overtemperature
  • EMC compatibility for residential environment:
  • Integrated PFC (P.F. 1) to meet EN61000-3-2
  • Integrated input filter for Category C1 (EN61800-3), Class B (EN55011)
  • Multi-pump operation (COMBO):
  • Up to 8 units
  • Working alternation for uniform pumps wearing
  • Master or slave replacement in case of failure to ensure continuity of operation
  • Advanced motor controls:
  • Next generation control of asynchronous motors
  • Sensorless control of permanent magnet synchronous motors
  • Inputs and outputs:
  • 2 programmable digital inputs for motor start & stop
  • Modbus RTU
  • 2 output relays for alarm and run indication
  • 2 analog inputs 4-20 mA
  • 2 analog inputs 0-10 V
Отзиви (0)


Все още няма отзиви.

Напишете първия отзив за „Многостъпална хоризонтална помпа EH DTm с Drive-Tech MINI“

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са отбелязани с *