6“ Потопяеми кладенчови помпи ESPA PUMPS ACUARIA 37

1,273.53лв.1,453.16лв.

6“ Потопяеми кладенчови помпи ESPA PUMPS ACUARIA 37

Описание

Integral, multi-stage, submersible, centrifugal electric pumps for wells from 6” or open wells.

These have been designed for supplying clean water to homes, small farms, sprinkler irrigation systems and pressurisation equipment.

All parts in contact with water are made of AISI 304 stainless steel, except for the spray nozzles, which are made of thermoplastic. The selected materials guarantee proven reliability and durability with drinking water. The motor is manufactured such as to allow effective cooling in the whole range of pumping flows, thanks to its double inner jacket and the special way the top sealing body and the double mechanical closure are achieved.

The compact design of the pump allows effective cooling of the motor even when installed in open wells, tanks or ponds; it has also been designed so that its suction via the bottom enables better exhaustion of the suction tank. In drilling installations it allows the exploited dynamic level to be increased

Downloads

Каталог Acuaria 37 Broshure
Ръководство за употреба acuaria 37 и 57
Размери acuaria 37 dimensiones
Чертеж с резервни части acuaria 37

Изчистване
Описание

Описание

Series features Acuaria 37:

  • Equipment
  • Check valve: No
  • Draining plug: No
  • Fittings: Not included
  • Pre-filter: Included
  • Electrical characteristics
  • Electrical isolation: F Class
  • Motor speed operation: Constantly speed
  • Motor type: Asynchronous
  • Protection rating: IP68
  • Reset: Automatic
  • Service factor: S1
  • Service type: Continuous
  • Manufacturing characteristics
  • Discharge connection type: Nut
  • Discharge diameter: 1 1/2″ G
  • Impeller type: Closed
  • Minimum well diameter: 155 mm
  • Motor cooling: Water
  • Solid passage (mm): 2,50
  • Stages: Multi stage centrifugal pump
  • Tightness by: Double Mechanical Seal
  • Materials
  • Diffuser: PPO + 30% GF
  • Discharge body: Cast GG0
  • Gaskets: NBR
  • Impeller/s: Stainless steel AISI 304
  • Mechanical seal: Aluminium- Graphite/ Graphite- Steatite
  • Mechanical seal bracket: Stainless steel AISI 304
  • Motor casing: Stainless steel AISI 304
  • Motor shaft: F114
  • Nuts and bolts: Stainless steel AISI 304
  • Outer pump body: Stainless steel AISI 304
  • Pre-filter: Stainless steel AISI 304
  • Pre-filter lid: Stainless steel AISI 304
  • Pump shaft: AISI 431
  • Suction body: Cast GG0
  • Usage limits
  • Liquid temperature (ºC): Min: 4 – Max: 40
  • Maximum no. of motor start-ups (start-ups/minute): 0,50
  • Maximum submersion (m): 60
  • Maximum working pressure (bar): 12
Допълнителна информация

Допълнителна информация

Модел

Помпа Acuaria 37 4 1x 230V – 12m3/h-60m, Помпа Acuaria 37 4 3x400V – 12m3/h-60m, Помпа Acuaria 37 6 3x400V – 12m3/h-90m

Отзиви (0)

Отзиви

Все още няма отзиви.

Напишете първия отзив за „6“ Потопяеми кладенчови помпи ESPA PUMPS ACUARIA 37“

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са отбелязани с *

Cart