5“ Потопяеми кладенчови помпи ESPA PUMPS ACUARIA 07 MN


5“ Потопяеми кладенчови помпи ESPA PUMPS ACUARIA 07


Integral, multi-stage, submersible, centrifugal electric pumps for wells from 5” or open wells.

These have been designed for supplying clean water to homes, small farms, sprinkler irrigation systems and pressurisation equipment.

All parts in contact with water are made of AISI 304 stainless steel, except for the spray nozzles, which are made of thermoplastic. The selected materials guarantee proven reliability and durability with drinking water. The motor is manufactured such as to allow effective cooling in the whole range of pumping flows, thanks to its double inner jacket and the special way the top sealing body and the double mechanical closure are achieved.

The compact design of the pump allows effective cooling of the motor even when installed in open wells, tanks or ponds; it has also been designed so that its suction via the bottom enables better exhaustion of the suction tank.

In drilling installations it allows the exploited dynamic level to be increased.


Каталог Espa pumps Acuaria07
Ръководство за употреба acuaria07n-168233-v8-06-2016
Размери Аcuaria 07 dimensiones
Резервни части Acuaria a005911



Series features Acuaria 07 N:

  • Equipment
  • Check valve: No
  • Draining plug: No
  • Fittings: Not included
  • Pre-filter: Included
  • Electrical characteristics
  • Electrical isolation: F Class
  • Motor speed operation: Constantly speed
  • Motor type: Asynchronous
  • Protection rating: IP68
  • Reset: Automatic
  • Service factor: S1
  • Service type: Continuous
  • Manufacturing characteristics
  • Discharge connection type: Nut
  • Discharge diameter: 1″ G
  • Impeller type: Closed
  • Minimum well diameter: 5″
  • Motor cooling: Water
  • Solid passage (mm): 2
  • Stages: Multi stage centrifugal pump
  • Tightness by: Double Mechanical Seal
  • Materials
  • Diffuser: PPO + 30% GF
  • Discharge body: Stainless steel AISI 304
  • Gaskets: NBR
  • Impeller/s: Stainless steel AISI 304
  • Mechanical seal: Aluminium- Graphite/ Graphite- Steatite
  • Mechanical seal bracket: PPO + 30% GF
  • Motor casing: Stainless steel AISI 304
  • Motor shaft: F114
  • Nuts and bolts: Stainless steel AISI 304
  • Other components: Impeller, Shaft, Pump Housing
  • Outer pump body: Stainless steel AISI 304
  • Pre-filter: Stainless steel AISI 304
  • Pump shaft: AISI 431
  • Suction body: Stainless steel AISI 304
  • Usage limits
  • Liquid temperature (ºC): Min: 4 – Max: 35
  • Maximum no. of motor start-ups (start-ups/minute): 0,50
  • Maximum submersion (m): 25
  • Maximum working pressure (bar): 12
Допълнителна информация

Допълнителна информация


Помпа Acuaria 07 3 MN 1x 230V – 4,5m3/h-35m, Помпа Acuaria 07 4 MN 1x 230V – 4,5m3/h-44m, Помпа Acuaria 07 5 MN 1x 230V – 4,5m3/h-55m, Помпа Acuaria 07 6 MN 1x 230V – 4,5m3/h-65m, Помпа Acuaria 07 7 MN 1x 220V – 4,5m3/h-75m

Отзиви (0)


Все още няма отзиви.

Напишете първия отзив за „5“ Потопяеми кладенчови помпи ESPA PUMPS ACUARIA 07 MN“

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са отбелязани с *